Viewing The Wireless Network Information; Deactivating The Wi-Fi Mode; Disconnecting The Wireless Network Connection; Optional Accessories With Your Phone - Yealink MP58 User Manual

3. Enter the SSID and then select a security mode from the Security drop-down menu:
• If you select None, tap Save.
• If you select WEP or WPA/WPA2-PSK, enter the password and then tap Save.
• If you select 802.1×EAP, select the desired EAP method and Phase-2 authentication, enter the
desired values in the Identity, Anonymous identity, and Password fields and then tap Save.
If you enable Show advanced options, select a desired value in the Proxy field; and if you select
Manual, enter the information about the proxy server in the corresponding fields.
Related tasks
Activating or Deactivating the Wi-Fi Mode

Viewing the Wireless Network Information

After connecting to the wireless network, you can view the wireless network information (such as wireless
status, link speed, security, IP address, signal strength, and so on.)
Procedure
1. Go to
2. Select the connected wireless network.

Deactivating the Wi-Fi Mode

You should deactivate the Wi-Fi mode when you need to connect your device to the wired network.
Procedure
1. Go to
2. Turn off Wi-Fi.

Disconnecting the Wireless Network Connection

Procedure
1. Go to
2. Select the connected wireless network.
3. Tap FORGET.
The wireless network is disconnected. You can tap it again to connect.

Optional Accessories with Your Phone

This chapter describes the optional accessories that you can use to extend your phone's capabilities.
• Bluetooth Headset
• USB Headset
• Wireless Headset
Downloaded from ManualsNet.com
> Settings > Device Settings > Wi-Fi.
> Settings > Device Settings > Wi-Fi.
> Settings > Device Settings > Wi-Fi.
search engine
| Optional Accessories with Your Phone | 61