Yealink SIP-T42S User Manual page 62

User Guide for the SIP-T42S IP Phone
The IP phone enters the local directory directly as there is only Local Directory enabled in
the directory by default.
If Local Directory is removed from the directory
Menu->Directory->Local Directory to enter the local directory.
Select the desired contact group and then press the Enter soft key.
2.
If the contact is not in any group, select All Contacts and then press the Enter soft key.
Press
3.
Press the Option soft key, and then select Delete.
4.
The LCD screen prompts the following warning:
Press the OK soft key to confirm the deletion or the Cancel soft key to cancel.
5.
You can also delete all contacts by pressing the Option soft key, and then select Delete All.
Placing Calls to Contacts
To place a call to a contact from the local directory:
Press the Directory soft key.
1.
The IP phone enters the local directory directly as there is only Local Directory enabled in
the directory by default.
If Local Directory is removed from the directory
Menu->Directory->Local Directory to enter the local directory.
Select the desired contact group and then press the Enter soft key.
2.
If the contact is not in any group, select All Contacts and then press the Enter soft key.
Press
3.
Do one of the following:
4.
If only one number for the contact is stored in the local directory, press the Send soft
-
key to dial out the number.
52
or to highlight the desired contact.
or to highlight the desired contact.
refer to Directory on page
(
refer to Directory on page
(
45 , press
)
45 , press
)