Yealink SIP-T42S User Manual page 131

Click Confirm to accept the change.
6.
If the Park or Retrieve soft key doesn't appear on the LCD screen, please select Disabled from
Note
the pull-down list of Custom Softkey via web user interface at path Settings->Softkey
Layout.
To park a call in FAC mode:
During a call, press the Park soft key (You may need to press the More soft key to see the
1.
Park soft key) or the call park key (if configured).
If the call park code is not configured, you need to enter the call park code (e.g., *68).
-
Press
If the call park code is configured, the phone will dial the configured call park code
-
shown as below:
Do one of the following:
2.
If you want to park the call against the local extension.
a)
Press
1)
If the call is parked successfully, you will hear a voice prompt confirming that the
call is parked.
If you want to park the call against desired extension.
b)
Enter an extension (e.g., 4603) where you want to park the call.
1)
Press
2)
If the call is parked successfully, you will hear a voice prompt confirming that the
call is parked. The call is parked against the extension you entered.
To retrieve a parked call in FAC mode:
Do one of the following:
1.
If the park retrieve code is not configured, dial the park retrieve code (e.g., *88).
-
If the park retrieve code is configured, press the Retrieve soft key on the dialing
-
screen or retrieve park key (if configured) on the IP phone.
, or the Park soft key.
.
or .
Basic Call Features
121