Blf List - Yealink SIP-T42S User Manual

User Guide for the SIP-T42S IP Phone
To retrieve a parked call in FAC mode:
Press the Retrieve soft key on the dialing screen.
1.
Press the desired BLF key to retrieve a call that is parked to the monitored user.
2.
Make sure that the call park code/park retrieve code is configured via web user interface at the
Note
path: Feature->Call Pickup. For more information, refer to

BLF List

You can use the BLF List feature to monitor a list of users defined by your system administrator.
For example, your system administrator enables BLF List, and creates a BLF List URI (e.g.,
BLFList@example.com) including a list of user1, user2 on the server. The BLF List keys on the IP
phone can present the status of user1 and user2. The key LEDs illuminate either flashing or solid
depending on the status of those users. For more BLF List key LED indicators, refer to
Instructions on page 5.
You can use the BLF List keys in the following ways:
When the monitored user is idle, press the BLF list key to dial out the phone number.

When there is already an active call on the IP phone, you can transfer the active call to the

monitored user by pressing the BLF List key. The phone handles the active call differently
depending on the configuration of transfer mode via Dsskey. For more information on the
transfer mode on DSS key, refer to
When the monitored user receives an incoming call, press the BLF list key to pick up the

call directly. Before picking up an incoming call, ensure that the BLF List Pickup Code has
been configured in advance. If the code is not configured, the phone will place a call to the
monitored user instead of picking up the incoming call of the monitored user when you
press the BLF List key.
When there is a conversation on the monitored user, press the BLF list key to barge in and

set up a conference call. Before barging in an active call, ensure that the BLF List Barge In
Code has been configured in advance. If the code is not configured, the phone will place a
call to the monitored user instead of barging in an active call of the monitored user when
you press the BLF List key.
When a call is being parked against the monitored phone, press the BLF List key to retrieve

the parked call from the monitored user. Before retrieving the parked call, ensure that the
BLF List Retrieve Call Parked Code has been configured in advance. If the code is not
configured, the phone will place a call to the monitored user instead of retrieving the
parked call when you press the BLF List key.
To configure BLF List settings via web user interface:
Click on Account->Advanced.
1.
Select the desired account from the pull-down list of Account.
2.
138
FAC Mode
Configuring Transfer Mode on DSS Key
on page 120.
LED
on page 135.