Yealink SIP-T42S User Manual page 80

User Guide for the SIP-T42S IP Phone
Line key is configurable via web user interface at the path Dsskey->Line Key.
Note When the phone is idle, you can also long press the line key to configure it directly on the phone.
You can assign functionalities to 15 line keys. These 15 line keys are indicated on three pages.
When you assign functionality to line key 1-6, labels of line keys are indicated on the first page.
The following figure shows an example:
When you assign functionalities to line key 7-15, labels of the line key 6-10 are indicated on the
second page, and labels of the line key 11-15 are indicated on the third page. The line key in the
right bottom is used to switch pages.
The following figure shows an example:
The following table lists the page icons:
Icons
Page Tips
You can use page tips feature to enable the page icon and page switch key LED to indicate
different statuses. This feature is disabled by default.
The following table lists the page icon to indicate different statuses:
Icon
70
Indicates the current page of line keys.
Indicates the non-current page of line keys.
Fast-flashing: The BLF monitored user receives an incoming call
on the non-current page.
The line receives an incoming call on the non-current page.
Solid: There is a parked call on the non-current page.
Description
Description