Yealink SIP-T42S User Manual page 119

The LCD screen prompts "Copy to all lines?".
Press the OK soft key to accept the change or the Cancel soft key to cancel.
3)
If you select No Answer Forward, you can activate it for a specific account.
c)
Press
1)
Answer Forward field.
Enter the destination number you want to forward all unanswered incoming
2)
calls to in the Forward to field.
Press
3)
forwarding from the After Ring Time field.
The default ring time is 12.
(Optional.) Enter the no answer forward on code or off code respectively in the
4)
On Code or Off Code field.
You can also activate no answer forward for all accounts, do the following:
Press
1)
Press the All Lines soft key.
2)
The LCD screen prompts "Copy to all lines?".
Press the OK soft key to accept the change or the Cancel soft key to cancel.
3)
Press the Save soft key to accept the change or the Back soft key to cancel.
5.
If you activate call forward for the default account, the associated line icon will change to
and the icon will appear on the status bar.
If you activate call forward for the non-default account, only the associated line icon will change
to .
If you activate call forward for all accounts, all line icons will change to
will appear on the status bar.
If the forward on code or off code is configured, the IP phone sends the corresponding code to
the server when a certain action takes place. For example, if you set the Always Forward on code
or , or the Switch soft key to select Enabled from the No
or , or the Switch soft key to select the ring time to wait before
or to highlight the No Answer Forward field.
Basic Call Features
,
, and the icon
109