Yealink SIP-T42S User Manual page 113

To activate DND in custom mode:
Press the DND soft key when the phone is idle.
1.
The LCD screen displays a list of accounts registered on the phone.
You can activate it for a specific account:
2.
Press
1)
Press
2)
field.
(Optional.) Enter the DND on code or off code respectively in the On Code or Off
3)
Code field.
If the on code or off code is configured, the IP phone will send the corresponding
code to activate or deactivate DND on the server. It is not available on all servers.
You can also activate DND for all accounts:
Do the following:
1)
Press the All On soft key if DND on code and off code are not needed on your
-
server.
After DND was activated for a specific account on the step 2, press
-
Press the All Lines soft key. The LCD screen prompts "Copy to all lines?".
Press the OK soft key to accept the change or the Cancel soft key to cancel.
Press the Save soft key to accept the change.
3.
If you activate DND for the default account, the associated line icon will change to
the icon
If you activate DND for the non-default account, only the icon
status bar.
If you deactivate DND for all accounts, the icon
icons change to
Note
When DND and busy forward are both activated for a specific account, calls to the specific
account will be sent to the configured destination number. For more information on call forward,
refer to Call Forward
or to select the desired account and then press the Enter soft key.
or , or the Switch soft key to select Enabled from the DND Status
to highlight the DND Status field.
will appear on the status bar.
.
on page 105.
Basic Call Features
will appear on the
appears on the status bar and all line
or
, and
103