Yealink SIP-T42S User Manual page 48

User Guide for the SIP-T42S IP Phone
The default time zone is "+8".
Enter the domain name or IP address of SNTP server in the NTP Server1 and NTP Server2
3.
field respectively.
Press
4.
Saving field.
Press
5.
Location field.
This field appears only if Daylight Saving field is selected to Automatic.
The default time zone name is "China(Beijing)".
Press the Save soft key to accept the change or the Back soft key to cancel.
6.
Note Please refer to
To configure the time and date manually via phone user interface:
Press Menu->Settings->Basic Settings->Time & Date->Manual Settings.
1.
Enter the specific time and date.
2.
Press the Save soft key to accept the change.
3.
The date and time displayed on the LCD screen will change accordingly.
To configure the time and date format via phone user interface:
Press Menu Settings->Basic Settings->Time & Date->Time & Date Format.
1.
Press
2.
Hour) from the Time Format field.
Press
3.
Format field.
Press the Save soft key to accept the change or the Back soft key to cancel.
4.
38
or , or the Switch soft key to select the desired value from the Daylight
or , or the Switch soft key to select the desired time zone name from the
Appendix A – Time Zones
or , or the Switch soft key to select the desired time format (12 Hour or 24
or , or the Switch soft key to select the desired date format from the Date
for the list of available time zones on the IP phone.