Yealink SIP-T42S User Manual page 35

If the network is secure, enter its password in the Password field.
5.
Press the OK soft key.
6.
Once the connection has completed successfully, the icon
the wireless network.
The Wi-Fi status is displayed on the center of LCD screen when the phone is idle.
Note
For more information on the password of the wireless network, contact your system
administrator.
Wi-Fi Protected Setup (WPS)
Wi-Fi Protected Setup (WPS) provides simplified mechanisms to configure secure wireless
networks. WPS can automatically configure a wireless network with a network name (SSID) and
strong WPA data encryption and authentication.
Two methods supported by Yealink IP phones in the Wi-Fi protected setup:
Push Button Configuration (PBC): The user simply has to press WPS key on both the IP

phone and gateway/router to connect.
Personal Identification Number (PIN): The user has to enter a PIN generated randomly

by the IP phone on the gateway/router to connect.
Push Button Configuration (PBC)
To connect to the wireless network using PBC method:
Press Menu->Settings->Basic Settings->Wi-Fi.
1.
Press the WPS soft key, and then select WPS.
2.
The LCD screen prompts "WPS has been activated, connect in 120s!".
Long press the WPS key on your gateway/router.
3.
Once WPS setup has completed successfully, the icon
Getting Started
appears after the name of
appears after the name of
25