Yealink SIP-T42S Quick Start Manual

2
4
5
Your Phone
1 Voicemail indicator
9 Re-dail
2 DDI soft keys
10 Speakerphone
3 Feature Softkeys
4 Navigation cluster
5 Volume
6 Mute
7 Headset
8 Voicemail
Copyright ©2021. All Rights Reserved.
Feature Buttons
Use feature softkeys to view calls and access features
such as Call Log. Use the Direct Dial soft keys (DDI's) to
call the contacts on the Directory.
Buttons illuminate to indicate status:
Green, steady: active
•
Green, flashing: incoming call
•
Red, steady: line in use
•
Red, flashing: internal extension incoming call
•
YEALINK SIP T42S
Quick Start Guide
Make a Call
1. Pick up the handset.
2. Enter a number, and then press the Send soft key.
1
Answer a Call
Pick up the handset.
Using the speakerphone, press
3
Put a Call on Hold
Press the Hold soft key during an active call.
6
To resume a held call, press the Resume soft key.
7
8
View Your Recent Calls
9
1. Press the History soft key when the phone is idle,
10
press or to scroll through the list.
2. Select an entry from the list, you can do the following:
Press the Send soft key to place a call.
soft key to delete the entry from the list.
Press the Delete
Transfer a Call to Another Person
1. From a call that is not on hold, press Tran soft key.
2. Enter the other person's phone number.
3. Press Transfer soft key again.
Add Another Person to a Call
1. From a connected call that is not on hold, press the
Conf soft key.
2. Enter the number of the second party, and then press
the Send soft key.
3. Press the Conf soft key again when the second party
answers. All parties are now joined in the conference.
.
V1