Yealink SIP-T42S User Manual page 116

User Guide for the SIP-T42S IP Phone
In the Forward block, mark the desired radio box in the Mode field.
2.
Click Confirm to accept the change.
3.
Note
Call forward mode is configurable via web user interface only.
To activate call forward in phone mode:
Press Menu->Features->Call Forward.
1.
Press
2.
Depending on your selection:
3.
If you select Always Forward:
a)
1)
2)
3)
If you select Busy Forward:
b)
106
or to select the desired forwarding type, and then press the Enter soft key.
Press or , or the Switch soft key to select Enabled from the Always
Forward field.
Enter the destination number you want to forward all incoming calls to in the
Forward to field.
(Optional.) Enter the always forward on code or off code respectively in the On
Code or Off Code field.