Yealink SIP-T42S User Manual page 76

User Guide for the SIP-T42S IP Phone
Activating the Bluetooth Mode
When you insert Bluetooth USB dongle BT40 into the USB port at the back of the IP phone, the
LCD screen prompts "Bluetooth adapter is added, scanning Bluetooth devices?". You can press
the OK soft key to enter the Bluetooth screen. You can activate Bluetooth mode and then scan
Bluetooth devices.
To activate the Bluetooth mode via phone user interface:
Press Menu->Settings->Basic Settings->Bluetooth.
1.
Press
2.
Press the Save soft key to accept the change.
3.
The Bluetooth status is displayed on the center of LCD screen when the phone is idle.
Bluetooth mode is configurable via web user interface at the path Features->Bluetooth.
Pairing and Connecting the Bluetooth Headset
Before you pair a Bluetooth headset, check the indicator on the Bluetooth headset to make sure
that the Bluetooth headset is discoverable. For more information, refer to the documentation
from the Bluetooth headset manufacturer.
To pair and connect your Bluetooth headset to your IP phone:
Press Menu->Settings->Basic Settings->Bluetooth.
1.
Press the Scan soft key to search the Bluetooth devices.
2.
66
or , or the Switch soft key to select On from the Bluetooth field.