Yealink SIP-T42S User Manual page 151

The Start REC soft key is not available when:
You place a new call

No free space of USB flash drive

The phone prompts you to answer an incoming call

Call Recording
You can record active calls or conferences.
To record a call:
Press the More soft key, and then press the Start REC soft key during a call.
1.
The LCD screen displays the icon
During the recording, you can do the following:
Press the More soft key, and then press the Pause REC soft key. Then
-
LCD screen and the duration stops counting. The Re REC soft key appears on the LCD
screen. Both you and other parties are not recorded.
Press the Re REC soft key to continue recording.
Press the More soft key, and then press the Stop REC soft key. The Start REC soft key
-
appears on the LCD screen. Recording stops and the LCD screen prompts "Call has been
successfully recorded on USB device".
Press the Start REC soft key to start recording again, the recording will be saved in a new
".wav" file.
Press
-
the LCD screen and the duration stops counting. Both you and the callee are not recorded.
Press the Resume soft key to resume the call, the recording is continued.
Press
-
or the Hold soft key while recording, recording is paused. Then
while recording, the muted party is not recorded.
and recording duration.
Advanced Phone Features
appears on the
appears on
141