Table of Contents
Advertisement
A user adds or updates an Alert Recipient
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0111
User Action:
Information only; no action is required.
• FQXSPEM4008I: SNMP Traps enabled by user [arg1]: EnabledAlerts=[arg2], AllowedFilters=[arg3] .
A user enabled the SNMP Traps configuration
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0112
User Action:
Information only; no action is required.
• FQXSPEM4009I: The UEFI Definitions have been changed.
UEFI Definitions change has been detected
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0152
User Action:
Information only; no action is required.
• FQXSPEM4010I: UEFI Reported: [arg1].
UEFI audit event logged.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0161
User Action:
Information only; no action is required.
• FQXSPEM4011I: XCC failed to log previous event [arg1].
XCC failed to log a previous event.
Severity: Info
Serviceable: No
76
ThinkSystem DA240 Enclosure and ThinkSystem SD630 V2 Compute Node Messages and Codes Reference
Advertisement
Table of Contents
