Table of Contents
Advertisement
This message is for the use case where a Management Controller ethernet interface is now active.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0025
User Action:
Information only; no action is required.
• FQXSPNM4015I: DHCP setting changed to [arg1] by user [arg2].
This message is for the use case where a user changes the DHCP setting.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0026
User Action:
Information only; no action is required.
• FQXSPNM4016I: Domain name set to [arg1] by user [arg2].
Domain name set by user
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0043
User Action:
Information only; no action is required.
• FQXSPNM4017I: Domain Source changed to [arg1] by user [arg2].
Domain source changed by user
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0044
User Action:
Information only; no action is required.
• FQXSPNM4018I: DDNS setting changed to [arg1] by user [arg2].
DDNS setting changed by user
Severity: Info
Serviceable: No
100
ThinkSystem DA240 Enclosure and ThinkSystem SD630 V2 Compute Node Messages and Codes Reference
Advertisement
Table of Contents
