Check Connected Wireless Clients; Status > Ipv6 Status - TRENDnet TEW-755AP User Manual

TRENDnet User's Guide
Network
 MAC Address: Displays the device's MAC address
 IP Address: Displays the assigned IP address
 Subnet Mask: Displays the subnet mask of the device
 Default Gateway: Displays the default gateway of the device
 Primary/Secondary DNS: Displays the DNS IP address of the device
Wireless
 Operation Mode: Displays the current operating mode for each wireless band
 Wireless Mode: Displays the wireless mode set on each wireless band
 Channel Width: Displays the applied channel width
 Frequency (Channel): Displays the current operating wireless channel
 Tx/Rx Packets: Displays the Transmit (Tx) and Receive (Rx) packet rate
 SSID List: Displays the multiple SSID settings.
© Copyright 2015 TRENDnet. All Rights Reserved.

Check connected wireless clients

Status > 2.4GHz Wireless Client
1. Log into your management page (see
2. Click on the Status tab and click Wireless Client List.
Status > IPv6 Status
1. Log into your management page (see
2. Click on the Status tab and click IPv6 Status.
TEW-755AP
"Access the management page" on page 16).
"Access the management page" on page 16).
33