Associated Information - TRENDnet TEW-730APO User Manual

TRENDnet User's Guide
Information is based on the mode settings applied to the access point and when System
mode is to Router.
 Connection Time: Display time duration of when the WAN has established
connection
 Access Type: Display the WAN connection type
 IP Address: Current assigned WAN IP address
 Subnet Mask: Assigned WAN Subnet Mask
 Default Gateway: Assigned WAN default gateway
 DNS1/2: Assigned WAN DNS IP address
 MAC Address: Displays the MAC address of the access points WAN port
LAN Settings
Information is based on the Wireless mode setting applied to the access pointr.
 IP Address: LAN IP address of your access point
 Subnet Mask: Subnet Mask of your Local Area Network (LAN)
 Gateway IP Address: Displays the gateway IP address assigned to the access
point.
Wireless Settings
© Copyright 2015 TRENDnet. All Rights Reserved.
 Operation Mode: Display the current wireless operation mode of the access
point.
 802.11 Mode: Displays the 802.11 mode applied on the access point
 SSID: Display the assigned SSID
 Encryption: Displays the wireless security encryption type applied
 ACK: Displays the applied ACK timeout period.
Interface Status
 Interface: Displays the interface of the access point
 Status: Displays the current status of the interface
 Channel: Displays the operating channel of the wireless interface
 Rate: Displays the data rate of the interface.

Associated Information

Open "Connections" in "Status" to check the information of associated wireless devices
such as MAC address, signal strength, connection time, IP address, etc. All is read only.
Click "Refresh" at the bottom to update the current association list. By clicking on the
MAC address of the selected device on the web you may see more details including
device name, connection time, signal strength, noise floor, ACK timeout, link quality, IP
information, current data rate, current TX/RX packets.
TEW-730APO
32