Fujitsu PRIMERGY GX2570 M6 Upgrade And Maintenance Manual page 177

▶ Push the four latches outward.
Figure 118: Installing the heat sink (C)
▶ Fasten the four captive screws in the sequence printed on the heat sink (1 to
4) by proceeding as follows:
Torque: 0.9 - 1.0 Nm
▶ First, fasten the captive screws 1 and 2 completely.
▶ Fasten the captive screws 3 and 4 completely.
GX2570 M6 Upgrade and Maintenance Manual
Processor (CPU)
177