System Board; Replacing The System Board - Fujitsu PRIMERGY GX2570 M6 Upgrade And Maintenance Manual

System board and components
▶ BIOS settings are automatically reloaded. Time and date must be set
manually.
16.4

System board

16.4.1

Replacing the system board

Field Replaceable Unit
(FRU)
Tools: Replacing the system board:
– Phillips PH2 / (+) No. 2 screw driver
– Magnifying glass for inspecting CPU socket springs
(recommended)
Note on network settings recovery
When replacing the system board, network configuration settings in the
system will be lost and replaced by default values. This applies to all
static IP address and LAN teaming configurations.
Ensure to note down your current network settings before replacing the
system board.
Preliminary steps
▶
"Locating the defective server" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶ Disconnect all external cables.
▶
"Getting access to the component" on page
▶
"Removing the CPU node" on page
▶
"Removing the air duct" on page
246
40.
49.
62.
Upgrade and Maintenance Manual
Hardware: 50 minutes
Software: 10 minutes
39.
40.
41.
GX2570 M6