Installing The Cross Bar - Fujitsu PRIMERGY GX2570 M6 Upgrade And Maintenance Manual

Basic hardware procedures
4.13.2

Installing the cross bar

Figure 33: Installing the cross bar
▶ Install the cross bar.
▶ Ensure that the recesses on the left and right sides of the cross bar fit into
the guiding pins of the chassis (see close-ups).
Figure 34: Fastening the screws
▶ Fasten the cross bar with one screw at each side (1).
▶ Fasten the cross bar with the screw (2).
GX2570 M6 Upgrade and Maintenance Manual 65