Fujitsu PRIMERGY GX2570 M6 Upgrade And Maintenance Manual page 81

CAUTION
▶
When replacing a PSU in a non-redundant PSU configuration, the
server must be switched off first.
▶
Replace the PSU after specifying the one that breaks down at work
by revitalization.
Preliminary steps
▶
"Locating the defective server" on page
▶ Check which PSU is defective.
A PSU is defective when the PSU status indicator lights orange. For more
information, see
▶ Only when replacing a PSU in a non-redundant configuration:
down the server" on page
▶ Remove the power cord from the defective PSU, see
power cord" on page
GX2570 M6
"Indicator on hot-plug PSU" on page
40.
40.
Upgrade and Maintenance Manual
Power supply unit (PSU)
39.
268.
"Disconnecting the
"Shutting
81