Figure 7: "Display" Configuration Interface - WAGO 750-8 Series Manual

Configuration Interface
On the one hand, the values shown on the display can be selected on the
"Display" page and and on the other, the display of the room temperature can be
changed. There are also input fields on this page for possible alarm messages.

Figure 7: "Display" Configuration Interface

Note
Text Inputs
The length of the text to be input is limited to the three characters for the
units and to 14 characters for the remaining texts. However, these characters
may not be fully represented on the display of the WRF06LCD room
operating unit. For more information about the displayable text, see the
WRF06-RS-485 Modbus
row 2" and "Units row 1, row 2 and row 3".
Anwendungshinweis
protocol description "Text messages row 1 and
®
15