Table of Contents
Advertisement
Installation
4
Installation
NOTE!
Consult the trailer manufacturer's body instructions and Zepro's instruction booklet before installation.
m
WARNING!
Zepro tail lifts are only approved for installation with Zepro installation kits.
4.1
Chassis bracket
1. Place the chassis brackets on the support frame.
2. Adjust the distance between the brackets according to the chassis width and centre the frame so that the
distance from the end of the frame to the bracket is the same on the left and the right.
3. Attach the clamp on the rear of the chassis bracket using the supplied washers and nuts.
4. Tighten the bolts using a torque wrench. Tightening torque: 260 Nm.
www.zepro.com
Image 24. Fitting the chassis bracket
ZN 2500-130/150
21
Advertisement
Table of Contents
