Table of Contents
Advertisement
Before installation
Horizontal distance from the outer edge of the beam to the
outside of the wheel: Max. 100 mm. See Image 9.
The lateral distance between the underrun protection
and the moving parts of the tail lift must not exceed
25 mm. See Image 10.
Each of the individual parts of the underrun
protection must have a surface area of at least 350
cm
. See Image 10.
2
10
0-100 mm.
Image 9. Statutory dimensions
Max 25 mm
Image 10. Statutory dimensions
ZN 2500-130/150
Min. area: 350 cm
2
Max 25 mm
www.zepro.com
Advertisement
Table of Contents
