Installing The Left Type-C Daughterboard - Dell Latitude 7330 Rugged Extreme Service Manual
Hide thumbs
Also See for Latitude 7330 Rugged Extreme:
- User manual (229 pages) ,
- Setup and specifications (32 pages) ,
- Accessories installation manual (7 pages)
Table of Contents
Advertisement
Steps
1. Remove the (M2x5) screw that secures the flat printed cable holder to the left Type-C daughterboard.
2. Disconnect the flat printed cable from its connector on the left Type-C daughterboard.
3. Disconnect the daughterboard cable from its connector on the left Type-C daughterboard.
4. Remove the (M2x3.5) and three (M2x5) screws that secure the left Type-C daughterboard to the system chassis.
5. Lift the left Type-C daughterboard from the system chassis.
Installing the left Type-C daughterboard
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the left Type-C daughterboard and provides a visual representation of the
installation procedure.
78
Removing and installing components
Advertisement
Table of Contents
