Next steps
1. Follow the procedure in
Handle
Removing the handle
Prerequisites
NOTE:
The handle screw is part of the handle assembly and cannot be ordered separately.
1. Follow the procedure in
About this task
The following images indicate the location of the handle and provide a visual representation of the removal procedure.
Steps
1. Remove the two (M3.5x9) screws that secure the handle to the system.
2. Remove the handle from the system.
Installing the handle
Prerequisites
NOTE:
The handle screw is part of the handle assembly and cannot be ordered separately.
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the handle and provides a visual representation of the installation procedure.
28
Removing and installing components
after working inside your
before working inside your
computer.
computer.