Steps
1. Remove the (M2x3) screw that secures the WLAN card holder to the system board.
2. Remove the WLAN card holder.
3. Disconnect the antenna cables from the WLAN card.
Table 2. Connectors on the wireless card
Antenna
Main (white triangle)
Auxiliary (black triangle)
4. Slide and remove the WLAN card from the WLAN card slot.
Installing the WLAN card
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the WLAN card and provides a visual representation of the installation procedure.
Cable Color
White
Black
Removing and installing components
43