Steps
1. Align the pins on the battery with the connector on the system.
NOTE:
Ensure that the metal pin of the battery is aligned in place.
2. Place the battery into the battery bay until it clicks into place.
3. Slide the battery latch to the locked state.
4. Ensure that the battery release latch is in the locked state.
Next steps
1. Follow the procedure in
Stylus
Removing the stylus
Prerequisites
1. Follow the procedure in
About this task
The following images indicate the location of the stylus and provide a visual representation of the removal procedure.
26
Removing and installing components
after working inside your
before working inside your
computer.
computer.