Installing The Express Card Reader - Dell Latitude 7330 Rugged Extreme Service Manual

Steps
1. Disconnect and remove the express card reader flat printed cable from its connectors on the system board and express card
reader board.
2. Remove the four (M2x3) screws that secure the express card reader board to the express card reader bracket.
3. Remove the four (M2x3) screws that secure the express card reader bracket to the system chassis.
4. Lift and remove the express card reader bracket from the system chassis.

Installing the express card reader

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the express card reader and provides a visual representation of the installation
procedure.
Removing and installing components 37