Steps
1. Remove the (M2x3) screw on the SSD door latch cover.
2. Push the SSD latch and lift the SSD door.
3. Push the carrier latch to release the SSD carrier.
4. Pull the mylar tape to lift the SSD carrier of the computer.
5. Flip the SSD carrier and remove the (M2x5) screw.
6. Pull the mylar tape and lift the SSD carrier cover.
7. Remove the M.2 2280 solid state drive.
Installing the M.2 2280 solid state drive
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the solid state drive and provides a visual representation of the installation
procedure.
Removing and installing components
21