Installing The Keyboard - Dell Latitude 7330 Rugged Extreme Service Manual

Steps
1. Remove the six (M2.5x4) screws that secure the keyboard and pry at the bottom edge of the keyboard.
2. Pry the keyboard from the front and then round the sides before flipping it 90° to incline over the touchpad.
3. Remove the four (M2x3.5) screws that secure the keyboard cover to the system chassis.
4. Disconnect the keyboard and backlight flexible printed cables from the connectors on the system board.
5. Lift the keyboard from the system.

Installing the keyboard

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the keyboard and provides a visual representation of the installation procedure.
Removing and installing components 31