System Board; Removing The System Board - Dell Latitude 7330 Rugged Extreme Service Manual

6. Install the heat-sink (UMA).
7. Install the fan.
8. Install the base cover.
9. Install the keyboard.
10. Install the primary M.2 2280 solid state drive
11. Install the battery.
12. Follow the procedure in

System board

Removing the system board

Prerequisites
1. Follow the procedure in
2. Remove the battery.
3. Remove the primary M.2 2280 solid state drive
4. Remove the keyboard.
5. Remove the base cover.
6. Remove the RF switch
7. Remove the WLAN card.
8. Remove the WWAN card.
9. Remove the dock I/O
10. Remove the rear I/O board.
11. Remove the express card
12. Remove the inner frame.
13. Remove the GPS board.
14. Remove the smart card
15. Remove the smart card reader I/O
16. Remove the fan.
17. Remove the heat-sink (UMA)
About this task
The following image indicates the connectors on your system board.
66 Removing and installing components
or
after working inside your
before working inside your
board.
board.
reader.
reader.
board.
primary M.2 2230 solid state
computer.
computer.
or primary M.2 2230 solid state
drive.
drive.