Expresscard Reader; Removing The Express Card Reader - Dell Latitude 7330 Rugged Extreme Service Manual

Steps
1. Adhere the coin-cell battery to the slot on the system chassis.
2. Connect the coin-cell battery cable to the connector on the system board.
Next steps
1. Install the base cover.
2. Install the primary M.2 2280 solid state drive
3. Install the battery.
4. Follow the procedure in

ExpressCard Reader

Removing the express card reader

Prerequisites
1. Follow the procedure in
2. Remove the primary M.2 2280 solid state drive
3. Remove the battery.
4. Remove the base cover.
About this task
The following images indicate the location of the express card reader and provide a visual representation of the removal
procedure.
36 Removing and installing components
or primary M.2 2230 solid state
after working inside your
before working inside your
or
computer.
computer.
primary M.2 2230 solid state
drive.
drive.