3. Install the
smart card reader I/O
4. Install the
smart card
5. Install the
rear I/O
board.
6. Install the
inner
frame.
7. Install the
GPS
board.
8. Install the
express card
9. Install the
dock I/O
board.
10. Install the
WWAN
card.
11. Install the
WLAN
card.
12. Install the
RF switch
board.
13. Install the
base
cover.
14. Install the keyboard.
15. Install the
primary M.2 2280 solid state drive
16. Install the battery.
17. Follow the procedure in
Left Type-C daughterboard
Removing the left Type-C daughterboard
Prerequisites
1. Follow the procedure in
2. Remove the battery.
3. Remove the
primary M.2 2280 solid state drive
4. Remove the keyboard.
5. Remove the
base
cover.
6. Remove the fan.
7. Remove the
heat-sink
8. Remove the
RF switch
9. Remove the
WLAN
card.
10. Remove the
WWAN
card.
11. Remove the
dock I/O
12. Remove the
rear I/O
board.
About this task
The following images indicate the location of the left Type-C daughterboard and provide a visual representation of the removal
procedure.
board.
reader.
reader.
or
after working inside your
before working inside your
(UMA).
board.
board.
primary M.2 2230 solid state
computer.
computer.
or
primary M.2 2230 solid state
drive.
drive.
Removing and installing components
77