6. Remove the
M.2 2280 solid-state
7. Remove the
wireless
card.
8. Remove the
I/O
board.
9. Remove the
hard drive
10. Remove the
memory
modules.
11. Remove the speakers.
12. Remove the
heat
sink.
13. Remove the fan.
14. Remove the
power
button.
15. Remove the
display
assembly.
16. Remove the touchpad.
17. Remove the
system
board.
NOTE:
The system board can be removed along with the heat sink.
18. Remove the
power-adapter
About this task
The following images indicate the location of the palmrest and keyboard assembly and provides a visual representation of the
removal procedure.
Steps
After performing the pre-requisites you are left with the palm-rest and keyboard assembly.
Installing the palmrest and keyboard assembly
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following images indicate the location of the palmrest and keyboard assembly and provides a visual representation of the
installation procedure.
76
Removing and installing components
drive.
assembly.
port.