Removing and installing components
This section provides detailed information on how to remove or install the components from your
computer.
Recommended tools
The procedures in this document require the following tools:
•
Small flat blade screwdriver
•
Phillips #0 screwdriver
•
Phillips #1 screwdriver
•
Hex screwdriver
•
Small plastic scribe
Removing the stylus and tether
1.
Follow the procedures in
2.
To remove stylus and tether:
a. Pull the stylus out from its slot on the computer [1].
b. Release and remove the tether from the computer [2].
18
Before Working Inside Your Computer
3