After Working Inside Your Computer; Recommended Tools; Stylus; Removing The Stylus - Dell Latitude 5424 Rugged Service Manual

After working inside your computer

After you complete any replacement procedure, ensure that you connect external devices, cards, and cables before turning on
your computer.
CAUTION: To avoid damage to the computer, use only the battery designed for this particular Dell computer. Do
not use batteries designed for other Dell computers.
1. Connect any external devices, such as a port replicator or media base, and replace any cards, such as an ExpressCard.
2. Connect any telephone or network cables to your computer.
CAUTION: To connect a network cable, first plug the cable into the network device and then plug it into the
computer.
3. Connect your computer and all attached devices to their electrical outlets.
4. Turn on your computer.

Recommended tools

The procedures in this document require the following tools:
● Phillips #0 screwdriver
● Phillips #1 screwdriver
● Plastic scribe
● 5.5 mm Socket wrench
● A pair of tweezers
NOTE: The #0 screw driver is for screws 0-1 and the #1 screw driver is for screws 2-4.

Stylus

Removing the stylus

1. Press the latch [1] and open the right I/O door [2].
72 Removing and installing components