2N IP Style 9157101 Installation Manual page 42


Tip
• Remove the protective connector cover to facilitate the threading of the UTP/STP
cable RJ terminal into the device box.
Main Unit Connectors
CONTROL Factory reset button
POWERLED Device status LED
LAN LAN connection status LED
VBUS Bus connector
Grounding terminal
IN1, IN2, IN3 Input terminals in passive / active mode (−30 V to +30 V DC)
•
•
Legend to the figure
OFF = open contact OR U
ON = closed contact OR U
Installation Manual 2N® IP Style
> 1.5 V
IN
< 1.5 V
IN
42 / 88