Table of Contents
Advertisement
Caution
•
Remember to purchase the I/O module, Part No. 9155034, along with the tamper
switch.
Security Relay
®
2N
Security Relay(Part No. 9159010) is used for enhancing security between the intercom and
the connected electric lock. 2N
firmware 1.15 and higher. It significantly enhances security of the connected electric lock as it
prevents lock opening by forced intercom tampering.
Function:
®
2N
Security Relay is a device installed between an intercom (outside the secured area) and the
electric lock (inside the secured area). 2N
activated if the valid opening code is received from the intercom.
Specifications:
Passive switch: NO and NC contacts, up to 30 V / 1 A AC / DC
Switched output:
•
Where the security relay is fed from the intercom, 9 to 13 V DC is available on the output
depending on the power supply (PoE: 9 V; adapter: source voltage of minus 1 V) / 400 mA
DC.
•
Where the security relay is fed from an external power supply, 12 V / 700 mA DC is available
on the output.
Dimensions: (56 x 31 x 24) mm
Weight: 20 g
®
Security Relay is designed for any 2N IP intercom with
®
Security Relay includes a relay that can only be
Installation Manual 2N® IP Style
65 / 88
Advertisement
Table of Contents
