Wiegand Module
The Wiegand module (Part No. 9155037) is one of the 2N
for connecting an external Wiegand device (RFID card reader, fingerprint / biometric data
scanner) and/or connecting the intercom to an external security exchange. All the inputs and
outputs are galvanically isolated from the intercom with the insulation strength of 500 V DC. It is
necessary to feed +U IN on Wiegand OUT from the Control Panel.
•
Reader – connects an external Wiegand-supporting reader. The reader sends information
on the intercom card number.
•
Control Panel – used for connection to the security PBX / access system to which the
intercom sends the card number information.
•
The module contains two 2N
•
These two connectors are fully interchangeable and can be used either as inputs from the
basic unit or outputs to other modules.
•
If this module is the last one on the bus, one of the connectors remains unconnected.
•
The module package includes a 80 mm long interconnecting cable.
Configure the module name in the Module name parameter in the Hardware / Extending
modules menu.
•
The LED IN input is addressed as follows: <module_name>.<input1>, e.g.
module2.input1.
•
The Tamper input is addressed as follows: <module_name>.<tamper>, e.g.
module2.tamper.
•
The LED OUT output (negated) is addressed as follows: <module_name>.<output1>, e.g.
module2.output1.
®
IP Style bus connectors.
Installation Manual 2N® IP Style
®
IP Verso system elements and is used
60 / 88