2N IP Style 9157101 Installation Manual page 36

Installation Manual 2N® IP Style
2.2.1 Chassis Installation
Drill chassis anchoring holes on a proper place. Use the chassis itself as a template to maintain
the horizontal level and carry the cabling at the bottom edge of the cable hole. The
recommended length of the accessible cables is 35 cm (1).
Insert the dowels in the holes drilled and use the screws to anchor the chassis (2).
Put the brackets to the left and right sides of the support handle and fit their positions using
screws (3A).
Fit the lock counterparts to the upper chassis part, hang the handle with the brackets to the
bottom part (4B) and fit all the components using screws (3C).
Now the chassis installation is complete (4).
36 / 88