Once started, the application begins to automatically search for all the 2N devices in the LAN
including their smart extensions which are DHCP/statically assigned IP addresses. All the devices
are then displayed in a table
®
1.
Select the 2N
®
the 2N
IP Style administration web interface login window for configuration. To change
the device IP address, select Config and enter the required static IP address or activate
DHCP. The default configuration password is: 2n. If the found device is grey highlighted, its
IP address cannot be configured using this application. In that case, click Refresh to find
the device again and check whether multicast is enabled in your network.
Tip
•
Double click the selected row in the 2N
device web interface easily.
Window of 2N
IP Style device to be configured and right-click it. Select Browse... to open
Installation Manual 2N® IP Style
®
Network Scanner
®
Network Scanner list to access the
72 / 88