Caution
®
•
2N
IP Style supports connection of just one Bluetooth module. If connected,
multiple Bluetooth modules may result in a undesired behavior.
Induction Loop Module
The Induction loop module (Part No. 9155041) is one of the 2N
used form transmitting audio signals directly into a hearing aid via a magnetic field.
•
The module contains two 2N
•
These two connectors are fully interchangeable and can be used either as inputs from the
basic unit or outputs to other modules.
•
If this module is the last one on the bus, one of the connectors remains unconnected.
•
The module package includes a 220 mm long interconnecting cable.
•
Used mode: T
•
Maximum power: 2 W
•
Frequency range: 100 Hz – 5 kHz / ± 3 dB
•
External antenna (Part No. 9155043) connection option
•
Antenna output short circuit resistance: without limitation
Fingerprint Scanner Module
The Fingerprint scanner (Part No. 9155045) is one of the 2N
used for verification of human fingerprints for access control and intercom / third party
equipment control.
•
The module contains two 2N
•
These two connectors are fully interchangeable and can be used either as inputs from the
basic unit or outputs to other modules.
•
If this module is the last one on the bus, one of the connectors remains unconnected.
•
The module package includes a 220 mm long interconnecting cable.
Important module properties:
•
FBI PIV and Mobile ID certification – FAP20
•
Durable glass touch surface
•
Rejection of spoof fingerprints
•
Operating temperature range: −20 to 55 ºC
•
0–90 % relative humidity, noncondensing
®
IP Style bus connectors.
®
IP Style bus connectors.
Installation Manual 2N® IP Style
®
IP Verso system elements and is
®
IP Verso system elements and is
57 / 88