TAMPER
Security system connecting terminals (on the back side above the connectors)
SWITCH
OUT
12 V / 0.6 A DC active output
RELAY
30 V / 1 A AC/DC NO/NC contact terminals
POWER 12
External 12 V / 4 A DC power supply terminals
V / 4 A
LAN
Optionally PoE+ 802.3at for device LAN connection
connector
Tamper
Switch detecting unauthorized device opening
Switch
SD CARD
SD card slot
Caution
•
We recommend that a grounding cable of the cross-section of 1.5 mm
Installation Manual 2N® IP Style
2
is used.
43 / 88