Table of Contents
Advertisement
Caution
•
The PoE power supply cannot provide 2N
only offers a limited mode (Low Power Mode) for basic configuration. This way of
feeding is not recommended. Connect the device to a PoE+ supply or a convenient
DC supply and restart the device.
•
The PoE power supply detection is performed during the device restart.
•
If the PoE power supply is used and the Low Power Mode is on, all configuration
sections show a feeding problem warning.
Combined Power Supply
®
2N
IP Style can be fed from an external power supply and PoE+ at the same time. In this mode,
the maximum power of 48 W (if a 12V / 4A DC external supply is used) or 36 W (if a 12V / 3A DC
supply is used) is available for feeding the main unit and connected modules.
Warning
•
In case the external power supply is disconnected / fails during the combined
external / PoE feeding, the device will get restarted. The device will run in the Low
Power Mode and a feeding problem warning will be displayed in all of the
configuration sections.
•
Reconnect the device to an external power supply or PoE+ and force restart to
recover the full functionality.
Main Unit Max Power Overview
Main Unit
Idle
Restart
Infrared light (100%)
®
IP Style with a full functionality as it
Consumption [W]
(Maximum value)
mA
(from 12V supply)
505
700
655
Installation Manual 2N® IP Style
W
(from 12V supply)
6.06
8.4
1.8
W
(from PoE+)
7.13
9.88
2.12
40 / 88
Advertisement
Table of Contents
