Table of Contents
Advertisement
If the address is 0.0.0.0, then the device did not get the IP address from the DHCP server and the
static IP address (DHCP OFF) has to be used. If DHCP OFF is set, the device static address is
192.168.1.100.
Device Restart
To restart the device, disconnect the device from the power supply or use the web interface in
the System / Maintenance section. No configuration change appears after the restart.
Caution
•
Do not touch the display during restart, it is being calibrated.
Factory Default Reset
Located among the main unit connectors, the CONTROL button helps you reset the factory
default values.
Follow the instructions below to reset the factory default values:
•
Disconnect the device from the power supply.
•
Press and hold the CONTROL button.
•
Connect the device to the power supply.
•
Keep holding the button for a few seconds and then release it.
Installation Manual 2N® IP Style
69 / 88
Advertisement
Table of Contents
