Table of Contents
Advertisement
Configuration Manual). Press # on your phone anytime to extend the call time. The automatic
call termination is signaled with a short beep 10 s before the call end.
®
Calling to 2N
IP Style
®
2N
IP Style allows you to answer incoming calls. Set the required parameters in the Incoming
calls group (refer to
Door Opening (Switch Activation) by Code
®
2N
IP Style is equipped with a door unlocking switch. Enter the valid code (refer to
Subs. Hardware / Switches
this switch.
Procedure:
•
Enter the switch 1 or 2 activating code using your phone keypad and press
confirmation. (Confirmation is unnecessary if the Lock code without confirmation is
enabled, refer to the Hardware / Switches / Advanced subsection).
•
A valid code is signaled acoustically
defined in Timeout for Entering Numbers, is signaled acoustically
Subs. Phone /
Calls of the Configuration Manual).
of the Configuration Manual) using your phone keypad to activate
Installation Manual 2N® IP Style
. An invalid code or interruption longer than as
for
.
77 / 88
Advertisement
Table of Contents
