Table of Contents
Advertisement
Virtual Number Call
If the Phone function enabled (refer to Subs.
Intercoms) parameter is selected, you can dial a user-defined phone number using the 2N
Style numeric keypad.
Procedure:
1.
Press the
2.
Enter the phone number using the numeric keypad and repress the
confirmation.
3.
Press the
Incoming Call Answering/Rejecting
If the automatic incoming call answering function is disabled (refer to Subs.
Configuration Manual for IP Intercoms), any incoming call to 2N
ringing. Push the
Door Opening (Switch Activation) by RFID Card
®
2N
IP Style is equipped with a door unlocking switch. To activate this switch, tap a valid card or
chip on the integrated card reader. Remember to complete the user access card ID (refer to
Subs. 5.2.1 Users
of the Configuration Manual for IP intercoms) to get an RFID card / chip access.
Procedure:
•
Tap a valid RFID card / chip on the integrated card reader located in the bottom part of the
device, whose symbol is backlit.
•
A valid RFID card / chip use is notified visually and by a continuous switch activation tone
or a predefined unlocking user sound. An invalid RFID card / chip use is signaled
acoustically
Door Opening (Switch Activation) by Code
®
2N
IP Style is equipped with a door unlocking switch. Enter the valid code (refer to Subs.
Switchesof the Configuration Manual for IP Intercoms) using the touch numeric keypad to
activate this switch.
Procedure:
•
Enter the switch activating numeric code using the touch numeric keypad and press the
lock button for confirmation.
button.
red button any time to end the call.
button to answer the call and the
or using a user sound.
Installation Manual 2N® IP Style
5.4.1
Phone of the Configuration Manual for IP
®
IP Style is signaled with loud
button to reject the call.
®
IP
green button for
5.4.1 Phone
of the
5.3.1
75 / 88
Advertisement
Table of Contents
