Features; To Use Conference (3-Way Call); To Use Speaker Monitor; To Adjust Call Volume - NEC MH240 User Manual

4.
F
EATURES
This section explains how to use features on
your phone.
• TO USE CONFERENCE
(3-WAY CALL)
You can establish a Conference call (3-way call).
- During an active call, press
hold the line.
- After hearing Special Dial Tone, enter the
phone number that you want to have a party
join the call.
- The called party answers the call, and then
press key. Your phone displays.
C O N F

• TO USE SPEAKER MONITOR

During an active call, you can use Speaker
monitor. When enter Speaker monitor mode, you
can hear called party's voice from a Speaker of
your phone.
- Press and hold
more to enter Speaker monitor mode.
- Press and hold
seconds or more to exit Speaker monitor
mode.
To use Speaker monitor, you need to
Note:
enable this feature. See "8.SETTINGS"
for more information.
key to
00:00:35
240
key for 2 seconds or
key again for 2

• TO ADJUST CALL VOLUME

You can increase or decrease the receiver
volume in Standby mode or during a call. The
volume can be set in 3 steps (From Level 1
[Small] to Level 3 [Large]).The factory default
value is Level 2 [Middle].
During a call:
Press key to select an appropriate volume
and then press "OK" soft key or wait timeout
while talking with your phone.
Call Volume
Large
In Standby mode:
- Press key in Standby mode. Your
phone displays the main menu.
- Press key to select "5.Setting" and
then press
- Press key to select "1.Usersetting" and
then press
- Press key to select "2.Talk" and then
press key.
- Press key to select "3.Call Volume"
and then press
- Press key to select an appropriate
volume and then press "OK" soft key.
You can reach Call Volume menu
TIP
by pressing following keys.
Go to Call Volume menu:
13
OK Back
key.
key.
key.