Conference; To Establish A Broker Call; To Answer A Camped-On Call - NEC DT730 User Manual

CONFERENCE

With call in progress, ask party to hold.
Press key, receive interrupted dial tone.
Transfer
Dial desired number.
After call is answered, press
lights.
Three-way conference is established.
CONF
4:26 PM TUE 13 APR 2004
Using the Soft Key
With a call in progress, press
desired number.
After call is answered, press CONF Soft Key.
Three-way conference is established.
CONF
4:26 PM TUE 13 APR 2004
MIC
If one party hang up, other two remain connected.
Conf LED goes out.
key. The LED
Conf
key and dial
Transfer
>>>
104

TO ESTABLISH A BROKER CALL

While engaged in a call and wishing to consult a
third party, press
Transfer
cally placed on hold.
Dial desired party to consult.
Press key to return to original caller. Third
Transfer
party is automatically placed on hold.
By repeating these steps, it is possible to alternate
between calls.
Note: The display indicates connected station or trunk at
any given time.

TO ANSWER A CAMPED-ON CALL

While engaged in a call, receive the camp-on indi-
cation (one short tone burst). LED of
flashes.
Answer
Press key. Call in progress is placed on
hold.
Connection to camped-on call is established.
Answer
Press key to return to original call.
Camped-on call is placed on hold.
By repeating these steps, it is possible to alternate
between calls. Display indicates connected station
or trunk at any given time.
key. Caller is automati-
Answer
key